DIY Elegant Home Lighting Ideas — Instructions & Pictures

Here Are Five DIY Handicraft Upscale Lighting Ideas For Home Decor .. Introduced by Interior4Design

You can do some of the easy handicrafts in your home to make it more beautiful by some easy home ideas that we will explain with pictures and easy steps, you can make some lighting of different shapes in your home that add a lot of beauty to the home. And steps.

Table lighting:

Tools:

1. Schneur.

2. Full-blown bulb.

3. Four wooden pieces (of which two are 80 cm long and two are 30 cm long).

4. Yarns as shown in the picture.

5. Screws and jacks.

Steps:

1. In the beginning you install the four objects in each other as shown in the picture, which is to put the wood of the two shortest trees in the middle in the middle of the top or bottom will lead to the same result, and then installed with nails as shown in the picture, and then put The other wood is 50 cm away from the horizontal wooden frame where you will install the lamp as shown in the picture.

2. Using a pinion, do a hole in one of the two longitudinal beams until you can turn the bulb wire through.

3. In this step we will carry the bulb wire through the hole and put the bulb in the short horizontal tree.

4. In the end we will wrap our thread on the two long beams above the bulb as shown in the picture, and then you will get the lighting in a wonderful and attractive and in a new and unfamiliar way.

Professional bedroom lamp work:

Tools:

1. Plastic bottle with attractive shape.

2. Bulb.

3. Chisel or sharp wood cutting machine.

4. Four pieces of wood (including circular and other wood with a length of 20 cm and another length of 80: 100 cm and another length of 20 cm).

5. Glue or adhesive for wood.

Steps:

1. In the beginning, we will cut the tallest piece of wood and the wooden piece in the upper shape to the middle as shown in the picture, so that the bulb wire will be used through it so that it does not appear and makes the overall shape unattractive.

2. We will connect all wood pieces to each other and paste them with glue or glue as shown in the picture.

3. In this step we perform the wire from the inside of the hole we made the coin in the tree in the first step and suspend the top of the bottle as shown in the picture, and put the bottom of the bottle above the piece of circular wood under the upper part of the bottle as shown in the image to confer something Of beauty in general form.

4. In the end you will get a quiet lighting and a beautiful and attractive form that others can admire

Bulb industry of Aquarius:

Tools:

1. Bucket.

2. Bulb in full parts.

3. Wooden parts to install the bucket as shown in the picture.

Steps:

1. In the beginning you do a hole in the top of the bucket so you can turn the bulb wire through.

2. Install the wooden bucket installed in the wall as shown in the picture.

3. Perform the wire through the bucket above and then install the rest of the bulb and then install the bulb itself, and then you will get a quiet and beautiful and attractive lighting that others can admire.

Professional home bulb:

Tools:

1. Four circular iron pieces as shown in the picture.

2. Wooden pieces in the shape of a box and hollow inside.

3. Two wooden pieces in the shape of a square without an inner cavity.

4. Schneur.

5. Bulb.

Steps:

1. At the beginning we do the holes in the 4 limbs for each piece of wood we have and we are keen to have the hole in each piece of wood and in each of the parties in the same place in the other pieces.

2. We install the bulb in the initial and non-hollow part as shown in the picture.

3. Then we install the pieces in the same pieces in which we installed the bulb.

4. In this step we install all the hollow pieces of wood available to us in the pieces, but we are careful to leave a space between each piece and the other so you can see the light of the bulb through which in the end we put the piece of wood hollow in the top as shown in the image, You get a very cool and attractive bulb and are quite unfamiliar.

Making a wall light with old wood:

Tools:

1. Old wood as shown in the picture.

2. Bulb.

3. A wooden piece of length equal to the width of the old wood stain that will be in the foreground.

4. Stand can be installed in the wall.

Steps:

1. In the beginning you install the old pieces of wood that you have in the other piece of wood, by gluing them with adhesive to the wood in the other piece of wood to be placed horizontally and the old pieces are placed vertically as shown in the picture.

2. We install the bulb in the wall.

3. We install the rack in the wall to fix the other wooden parts as shown in the picture.

4. In the end we put the old pieces of wood on the rack and will eventually produce this wonderful and attractive form that impresses others

Architecture & Design: DIY Elegant Home Lighting Ideas — Instructions & Pictures

So we have finished writing the post DIY Elegant Home Lighting Ideas — Instructions & Pictures and wish to offer you the interior designs so that you ca n share with friends and relatives on Facebook Twitter and Google Plus and other social networks and digital networks, also you can send comments through the box below to express your opinion on the article, so you could send suggestions and preferences to take into consideration for editing and adding, a bouquet of love appreciation and respect sent to you through Interior4Design platform.

Tweet